Зборник радова
Грађевинског факултета


ЗБОРНИЦИ
НАУЧНИ СКУПОВИ
АРХИВА







ЗБОРНИК РАДОВА
5. МЕЂУНАРОДНЕ КОНФЕРЕНЦИЈЕ
САВРЕМЕНА ДОСТИГНУЋА У ГРАЂЕВИНАРСТВУ 2017 , 2017.год., стр. 253-260


NUMERICAL INVESTIGATION OF THE COLD FORMED STEEL PROFILES BOLTED JOINTS
 
DOI: 10.14415/konferencijaGFS2017.025
UDK: 519.6:624.014.27
CC-BY-SA 4.0 license
Аутор : Galatanu, Teofil Florin; Radu, Dorin
 
 Резиме:
 Present paper describes the numerical investigation of the cold formed profiles joint assembled in a back-to-back pair. There are presented two types of joints, one for which preloading bolts used and the second type for which there were used the bracket joints with normal bolts, where the profiles are inserted in the welded plates joint. The quasi-static loading was applied in the form of concentrated force at the middle of the joint made in a simple supported beam. The F.E. models include the contact between different components and material nonlinearity. There are monitored the evolution of tension in joint, the maximum displacement of the joint beam and the identification of the potential areas for development of the local buckling. The results are based on the numerical studies achieved in the same time with the experimental tests.
 
 Кључне речи:
 Cold-formed steel joint, finite element analysis, nonlinear quasi-static finite element